Foaming bath whip base is a beautiful product to work with and you’ll end up making so many different creations. Our foaming bath whip is Australian made using high quality Australian ingredients. None of the ingredients or products are tested on animals.
It is an incredibly flexible product, and you can create simple whipped foaming bath butters, a sugar scrub, a body soufflé, or a salt scrub, all from one product base. It gives you the perfect opportunity to get creative, experiment and make products unique to your business. So, let’s give you the run down on how to use it.
When taking the base out of the container, ensure you use an entire cross-section, don’t just take from the top. The base tends to become more viscous at the bottom and you’ll want to mix this altogether.
Recommended Extras Loadings
- Fragrance Oils maximum 2%
- Essential Oils maximum 1%
- Sugar and Salt Exfoliants maximum 60%
Option 1: Whipping
What you need:
- Foaming Bath Whip
- Hand Mixer
- Bowl
- Fragrance Oils or Essentials Oils
- Body Safe Colour (optional)
- Salt or sugar exfoliants (optional)
- Tub or tubes to store finished product in
Method
- Firstly, select a container or bowl which will hold over double the amount of base you are going to put in it.
- Weigh out your foaming bath whip base into your bowl. You’ll then add your fragrance oil (2% maximum loading) or your essential oils (1% maximum loading). If you are using colour, this is when you add it in too. Always make sure you use body safe colouring.
- Then, using your hand mixer, beat it until it begins to look like whipped frosting.
- If you are adding sugar or salts as an exfoliant, add them in at the end, folding into your mixture with a silicone spatula. Afterwards, using the hand mixer again, beat until you reach your desired consistency.
- Let rest for 5 minutes and then divide the mixture into your prepared tubs or tubes.
Due to the consistency of this soap base, it will remain soft and buttery and should be packed in tubes or tubs. It is not mouldable.
Options 2: Heating
What you need
- Foaming Bath Whip
- Double Boiler
- Thermometer
- Fragrance Oils or Essentials Oils
- Body Safe Colour (optional)
- Salt or sugar exfoliants (optional)
- Tub or tubes to store finished product in
- Using a double boiler method, slowly heat up the Foaming Bath whip butter, do not take the base above 60oC, maintain stirring while adding your fragrance oils and body safe colouring.
- Allow to cool to 53oC – 55oC while still stirring and then add any extras you would like in there.
- Continue stirring until your soap reached 52oC and fill your containers or pour into tubes while the mixture is between 47oC and 52o Allow to cool completely to room temperature.
Note that this soap is not mouldable and will always stay soft and buttery, this scoopable, soft and moisturising soap base should be packed in tubes or tubs.
0 comments