You've received your Simply Candle Supplies vinyl labels! Now it's time to apply them to your candle jar. Personalising your candles is so easy with the vinyl labels! If you have a custom design in mind, contact us and we'll put together a quote!
Step 1
Ensure your surface is clean and dry before you begin.
Step 2
Included in your delivery will be a small sheet of adhesive application tape with your labels. You can also use masking tape which works well too (do not use sticky tape as it is too strong and will leave residue on your label).
Step 3
Carefully remove all of the negative pieces of sticker from around your label (the pieces you don’t want to stick on the jar) – do this with a sharp pointed object such as a pin, skewer etc.
Step 4
Remove the backing from the application tape and place it over your label.
Step 5
Slowly peel the backing off your label leaving the label you are wanting to apply stuck to the adhesive tape (you may need to bend the label slightly to help the sticker come away from the backing).
Step 6
Once all the sticker has stuck to the adhesive tape, place the adhesive tape where you want your sticker to stick. Note: Ensure your sticker is where it needs to be before you stick it down, lifting it up after it is stuck down will impact the labels adhesion.
Step 7
Slowly remove the adhesive tape leaving your sticker attached to the jar.
Step 8
Wipe clean and enjoy.
0 comments